Tuesday, June 16, 2015

Pool and Spa Testing: What am I really testing?

The proper operation of any commercial pool or spa begins with the daily testing required by local and state codes. Many pool operators will conduct tests without understanding fundamental concepts. The most important thing to remember is that we test to keep people safe. Daily testing is focused on determining several factors, with chlorine and pH levels being the most significant samples. Chlorine is used as a sanitizer to help control bacteria and other harmful parasites. The typical range of chlorine in commercial pools is 1.0 ppm to 10 ppm with 3.0 ppm to 5.0 ppm being ideal for most conditions. Due to warmer water temperatures, spas are normally kept from 3.0ppm to 10 ppm. The chlorine that is actively combating the bacteria and parasites is known as “Free Chlorine” or FC.
Chlorine when introduced into the water forms a weak acid called hypochlorous acid. The weak acid tears the cells of the bacteria or parasites apart. As people use the pool or spa they introduce soap, perfume, sweat, urine and trace amounts of fecal matter into the body of water. The chlorine reacts with these elements and produces chloramines. The chloramine is the strong odor that most people attribute to extra chlorine in the water. A clean pool should have very little smell associated with it. As chloramines increase the FC is less effective as a sanitizer. The body of water must either be drained and fresh water added or treated with a pool shock. There is no test for chloramines. However, there is a test for the effects of chloramines called “Combined Chlorine” or CC. The level of CC should never exceed .8 ppm.
The pH sample is a measurement of how acidic or base the water is. You might remember from school that the pH scale ranges from 0 (acidic) to 14 (base). Anything < 7 pH is considered acidic and > 7 pH is alkaline. Pure water is equal to 7 pH. Swimming pools and spa are maintained in the 7.2 to 7.8 pH range, with 7.4 pH being a very common goal. The chlorine is found to be the most effective in this range.
Alkalinity is the measurement of the ability of the water to resist changes in pH. The typical alkalinity range is 60 ppm to 180 ppm with 80 ppm to 120 ppm being ideal. If alkalinity dips below 60 ppm the phenomenon of pH bounce occurs. The pH value can fluctuate dramatically affecting the balance of the water.

Here are some important tips to remember when taking your samples:
  • Water testing should be conducted with fresh samples.
  • The oil from your skin can affect tests. Do not place fingers inside of test tubes.
  • If you obtain a bad reading, take a second sample to confirm.
  • Keep your testing kit in good working order.
  • Always use adequate light when determining levels.
  • Test frequently, especially during heavy use.
   
   It’s important to remember that the commercial pool operator must test daily to verify safe operation and catch issues before they become a problem. While chlorine does a really great job of killing bacteria, there are other life forms such as protozoa that have a tough outer cell layer that is not easily penetrated by chlorine e.g. Cryptosporidium, Giardia These bugs can live in the improperly treated water and cause water-borne illness. If the free chlorine is too low or there is too much combined chlorine, you can allow the most dangerous parasites a chance to harm someone. It’s up to you to keep them in check and provide a clean swimming experience for everyone.

8 comments:

  1. Now I know that when I enter a pool and there is a strong odor of chlorine ... typical of hotel pools in my experience ... that pool is likely not being maintained at its best!

    ReplyDelete
    Replies
    1. Yes, it is likely that was the cause. Occasionally, there are issues with overfeeding of chlorine. However, the strong smells we associate with pools and the burning in the eyes is caused from excessive chloramines. A single bather can introduce around a billion bacteria with a single dip in the water. Due to our love of TP we are an un-clean bunch. This is why showering is strongly recommended before entry.

      Delete
    2. Are the rules the same for indoor and outdoor pools?

      Delete
    3. Turi, the rules are basically the same.

      Delete
  2. Good article. Answered my question about why some pools smell so "chloriney". Yuk!

    ReplyDelete
  3. Thanks Jo! You should never use a pool if you can't see the drains in the bottom. Test strips can also be brought with you.

    ReplyDelete
  4. We are currently staying at a condo in Door County. And the pool area smells strongly of chlorine. Not sure l am as excited about taking a swim now that l have read your blog:-\ Thanks for the great info:-)

    ReplyDelete
    Replies
    1. You are very welcome. Hope you enjoy your vacation!

      Delete